Var Limiter - Basler DECS-250 Instruction Manual

A Stator Current Limiter Enable: Check box to enable.
B
Low SCL Level: Adjustable from 0 to 66,000 Aac in 0.1 Aac increments.
C High SCL Level: Adjustable from 0 to 66,000 Aac in 0.1 Aac increments.
D
High SCL Time: Adjustable from 0 to 60 s in 0.1 s increments.
E Initial Delay: Adjustable from 0 to 10 s in 0.1 s increments.

Var Limiter

BESTCOMSPlus
HMI Navigation Path: Settings, Operating Settings, Limiters, VAR
The var limiter can be enabled
and secondary setting groups provide additional control for two distinct machine operating conditions. The
var limiter setpoint
A delay setting
acts to limit the var flow.
Var limiter settings are illustrated in Figure 52.
A Var Limiter Enable: Select checkbox to enable var limiter.
B Var Limiter Setpoint: Adjustable from 0 to 200% in 0.1% increments.
C Var Limiter Delay: Adjustable from 0 to 300 s in 0.1 s increments.
CALL US TODAY CALL US TODAY
1-888-POWER-58 1-888-POWER-58
Figure 51. Stator Current Limiter Settings
® Navigation Path: Settings Explorer, Operating Settings, Limiters, var
A to limit the level of reactive power exported from the generator. Primary
B is expressed as a percentage of the calculated, maximum VA rating for the machine.
C establishes a time delay between when the var threshold is exceeded and the DECS-250
Figure 52. Var Limiter Settings
REQUEST A QUOTE REQUEST A QUOTE
parts@genpowerusa.com parts@genpowerusa.com
SHOP ONLINE SHOP ONLINE
www.genpowerusa.com www.genpowerusa.com