See Fig. - JVC TH-G40C Service Manual

3.1.5 Removing the Rear panel (See Fig.10, 11)
(1) Disconnect the Power cord from connector
SMPS board. (See Fig.10)
(2) Disconnect the connector wire from FAN connected to con-
nector PN603 of the Amp board. (See Fig.10)
(3) Remove the one screw F and seven screws G attaching
the Rear panel. (See Fig.11)
3.1.6 Removing the Front jack board (See Fig.12)
(1) Disconnect the card wire from Front jack board connected
to connector PN204 of the Main board.
(2) Remove the two screws H attaching the Front jack board.
PN901 of the
PN901
PN603
Fig.10
G
Fig.11
H
PN204
Fig.12
(No.MB672<Rev.002>)1-13
F