JVC TH-G40C Service Manual page 16

3.2 DVD mechanism
3.2.1 Main base (See Fig.1)
(1) Place the disc clamp assembly as Fig.1.
(2) Lift up the disc clamp assembly in direction of the arrow (A).
(3) Separate the disc clamp assembly from the Clamp holder.
(4) Turn the Clamper plate to counterclockwise direction and
then lift up the clamper plate.
3.2.2 Disc tray (See Fig.2)
(1) Insert and push a screwdriver in the emergency eject hole
(A) at the right side, or put the screwdriver on the lever (B)
of the emergency gear and pull the lever (B) in direction of
arrow so that the Disc tray is ejected about 15 ~ 20 mm.
(2) Pull the Disc tray until it is separated from the Main base
completely.
1-16 (No.MB672<Rev.002>)
Disc clamp assembly
Clamper plate
Magnet clamp
Upper clamp
Fig.1
Disc tray
Main base
Lever
(B)
Main base
BOTTOM SIDE VIEW
Fig.2
Main base
(A)
(Fig. A)
Clamp holder
Main base