Disassembly - JVC TH-G40C Service Manual

3.1 Main body
3.1.1 Removing the Metal cover (See Fig. 1, 2)
(1) Remove the three screws A attaching the Metal cover.
(See Fig.1)
(2) Remove the four screws B attaching the both side of the
Metal cover. (See Fig.2)
3.1.2 Removing the Front Panel (See Fig. 3 to 6)
(1) Disconnect the card wire from Front panel connected to
connector PN103 of the Amp board. (See Fig.3)
(2) From the top side of the Front panel, disengage three
hooks a engaged Front panel. (See Fig.4)
(3) From the both side of the Front panel, disengage two
hooks b engaged Front panel. (See Fig.5)
(4) From the bottom side of the Front panel, disengage three
hooks c engaged Front panel. (See Fig.6)
SECTION 3

DISASSEMBLY

PN103
Fig.3
A
Fig.1
B
Fig.2
a
hook
Fig.4
b
hook
Fig.5
c
hook
Fig.6
(No.MB672<Rev.002>)1-11