Table of Contents
Advertisement
1. With the boat level on trailer, remove the hull or
garboard drain plug and insert QuickDrain through
the hull opening (outside of hull).
2. Remove QuickDrain hose cap and let oil flow into
used oil container. When all oil has drained, replace
cap and return QuickDrain to storage position.
3. Replace the hull or garboard drain plug.
4. For Engines with Cartridge Style Filter:
the oil filter cap from the canister assembly and wipe
clean. Carefully remove and discard the O-ring from
the cap and the oil filter cartridge.
For Engines with Spin-on Filter: Position a suitable
container under the filter. Unscrew and remove
the filter; ensure that the filter seal is removed with
the filter. Wipe up any spilled oil from the bilge and
dispose of properly.
5. For Engines with Cartridge Style Filter:
501022S oil filter cartridge into the canister assembly.
Install and lubricate the new filter cap O-ring, replace
the oil filter cap on the canister and tighten to the
specification indicated on the cap.
For Engines with Spin-on Filter: Fill a new 872025
oil filter about half full with clean engine oil. Lightly
lubricate the oil filter gasket with clean engine oil and
"spin on" the filter until the gasket makes contact.
Hand tighten filter 1/2 to 3/4 turn after contact.
© 2016 Indmar Marine Engines
6. Add the new oil through the cap located on the
engine valve cover. Fill only to the FULL mark of
dipstick.
7. After initial start up, always carefully inspect oil drain
plug and oil filter gasket area for leaks.
8. Stop the engine and re-check oil level. Add if
necessary.
Remove
Oil Additives
Do not use oil additives. Indmar engines do not need
oil additives. Use of recommended oil, along with
regular oil and oil filter changes, will protect your engine
adequately.
Disposing
Used engine oil contains dangerous chemicals and is
Insert a new
considered a hazardous waste. Do not allow used oil to
remain on your skin for any length of time. Make certain
to drain all free flowing oil from the filter prior to disposal.
Recycle used oil by taking it to a collection center. If you
have a problem disposing of used oil, ask your Indmar
dealer or service station for the name of a local oil
recycling center for proper disposal.
MAINTENANCE
7-7
Advertisement
Table of Contents
