Table of Contents
Advertisement
SECTION SIX
3. Once the engine is started, allow it to reach
operating temperatures of at least 120°-140°F
(49°-60°C) before accelerating to speeds above
3000 RPM.
Figure 6.1 – Typical Temperature Gauge
4. Monitor your gauges and warning lights frequently to
ensure that engine temperatures and pressures are
within the proper ranges.
Figure 6.2 – Typical Oil Pressure Gauge
6-2
INDM-A015
INDM-A014
OPERATING THE CONTROLS
Be sure to refer to the boat owner's manual for additional
information. Should there be any difference between
the information presented in this manual and the boat
owner's manual, the boat owner's manual should take
precedence.
The shift / throttle control is important to daily operation.
Have your dealer check it regularly for proper adjustment
and lubrication.
NOTICE
Do not use the throttle lever during the starting
sequence. Your electronic engine controls should not
need any throttle movement while starting.
Your engine has a safety feature that allows the engine
to crank only in the neutral position. If during the starting
process your engine will not turn over, make sure that
the shift / throttle control is in the NEUTRAL position and
try again.
Advertisement
Table of Contents
