Table of Contents
Advertisement
Check the oil level with the dipstick at the start of the
day and then every time you get fuel. To get an accurate
reading, your engine should be warm and the boat
should be level.
Figure 7.2 – Dipstick
NOTICE
For best results wait about 5 minutes after you turn off
the engine to allow the oil to drain into the oil pan, giving
you a more accurate reading.
1. CAUTION! Engine and engine oil may be hot. Pull
dipstick from engine.
2. Wipe oil off stick with clean towel/cloth.
3. Insert dipstick completely into the dipstick tube.
4. Remove dipstick and read oil level.
5. After reading is complete, return dipstick to tube.
6. Add oil if necessary.
© 2016 Indmar Marine Engines
Adding Oil
If oil level on the dipstick reads below the ADD mark,
add only enough oil to return level to FULL mark.
Do not overfill. If your oil level is above the full mark on
the dipstick, the engine may be damaged.
INDM-A003
1 - Engine Oil Fill
MAINTENANCE
NOTICE
Figure 7.3 – Engine Oil Fill
1
INDM-0018
7-5
Advertisement
Table of Contents
