Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hollyland HLHC050G1
Summary of Contents for Hollyland HLHC050G1
- Page 1 HDMI Extender 50M with POE and IR User manual V1.0...
-
Page 2: Product Summary
Product summary The HDMI Extender with Bi-direc onal IR, auto EDID/EQ, and PoE func on extends high defini on video and audio signals, IR, and power at a distance of up to 164 /50m over a single Cat5e/6 cable. Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmi er or Receiver to be powered without the use of a power supply. - Page 3 Cau on The HDMI Extender over Single Cat5e/6 with Bi-direc onal IR, been tested for conformance to safety regu- la ons and requirements, and has been cer fied for interna onal use. However, like all electronic equipment, the HDMI extender should be used with care. Please read and follow the safety instruc ons to protect you- rself from possible injury and to minimize the risk of damage to the unit.
- Page 4 Features & Specifica ons Features Allows HDMI audio/video signals to be transmi ed using a single Cat5e or Cat6 Cable. Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the transmi er and receiver to be powered off over a single power supply Slim and compact design.
- Page 5 Features & Specifica ons Specifica ons HDMI Compliance HDMI Deep Color 24bit color depth, Full 3D HDCP Compliance HDCP 1.4 Video Bandwidth 480i/480p/720p/1080i/1080p @60 and Support HDMI over UTP [1080P]-50m [165 ] Audio Support Surround Sound (up to 7.1 ch) or stereo digital audio Human body model +/- 4kV(contact discharge) ESD protec on +/-8KV(air-gap discharge)
- Page 6 Panel descrip ons 1 1 12 13 (1) HDMI IN - Connects to a HDMI source with a HDMI male-male cable (2) IR Blaster - Infrared 3.5mm socket for plugging in the extension cable of IR blaster (3) IR Receiver - Infrared 3.5mm socket for plugging in the extension cable of IR receiver (4) 12 V DC - Connect to 12 V DC power supply (5) Power Indicator Light (6) Status Indicator Light...
-
Page 7: Connect And Operate
Installa on & Opera on IR TX IR TX CAT5E/6 HDMI HDMI IR RX IR RX HDMI source HDTV Connect and operate (1) Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc.to the HDMI input on the Transmi ng unit. -
Page 8: Ir Pass-Through
Installa on & Opera on At this point the display connected should display the source signal connected to the extender set. If no signal is being displayed, connect a shorter Cat5e/6 cable (jumper or patch cable). If a display is having difficulty re- ceiving a signal, access the display's menu and adjust the resolu on (lowest to highest un l signal is displayed). - Page 9 Installa on & Opera on IR BLASTER (TX) To control the source: Plug IR Blaster into IR TX port of transmi er unit; place blaster in front of the IR eye of the source. To control the display: Plug IR Blaster into IR TX port of receiver unit; place blaster in front of the IR eye of the display.
- Page 10 Installa on & Opera on To Control the Source: To Control the Display: 1. Plug the IR Blaster into the 1. Plug the IR Receiver into the IR TX Port on the Transmitter IR RX Port on the Transmitter 2. Plug the IR Receiver into the 2.
-
Page 11: Edid Management
Installa on & Opera on EDID Management The HDMI extender is equipped with EDID management; however there is no need to adjust any dip switches or dials, the unit automa cally reads the EDID from the display and save it internally. This feature was created for the installer in mind, for a plug and play installa on. -
Page 12: Maintenance
Maintenance 1. Do not expose this unit to water, moisture, or excessive humidity. 2. Do not install or place this unit in a built-in cabinet or other confined space without adequate ven la on. 3. To prevent risk of electrical shock or fire hazard, due to overhea ng do not obstruct unit's ven la on openings. 4. -
Page 13: Trouble Shoo Ng
Trouble shoo ng 1. Best results are usually achieved when the source and display resolu ons are the same. If resolu ons differ, the extenders will try to adjust the signal to match the resolu on of the HDTV with the lowest resolu on. This will result in a picture with a lower resolu on on the other HDTV sets. -
Page 14: Package Contents
Package contents HDMI extender (TX & RX) (2) IR Blasters (TX) (2) IR Receivers (RX) (1) DC 12V in line power supply Product Manual UL TMALINI< SOLUTIONS SC:NSC:, CONNC:CT, SC:CUMC: Phone: 0415 468 731, Email: sales@ultralinks.com.au Suite 1A Level 2, 802 Pacific Highway, Gordon NSW 2072 www.ultralinks.com.au... - Page 15 UL TMALINI< SOLUTIONS SC:NSC:, CONNC:CT, SC:CUMC: Phone: 0415 468 731, Email: sales@ultralinks.com.au Suite 1A Level 2, 802 Pacific Highway, Gordon NSW 2072 www.ultralinks.com.au...