Recharging The Remote Control Unit - Pioneer PDSP-1 Operating Instructions Manual

Front Panel

Recharging the Remote Control Unit

1 Connect the accessory AC adapter to the recharger and a household AC outlet.
2 Place the remote control unit on the recharger, aligning the indents on the remote control unit
with the tabs on the recharger.
Note:
During recharging, the indicator shown below will appear on the upper right corner of the display.
Recharging indicator
Caution:
Do not use AC adapters other than the one supplied.
"Can't recharge remote control unit"
Rear Panel
Note:
Illustration depicts U.S. model.
P39
16
Remote Control Unit