Table of Contents
Advertisement
Changing
Adjusting the Tone
Surround Sound
Using the
3
The following screen appears:
Surround Setup
1 Left
2 Right
3 Surround L
4 Surround R
5 Center
6 Aux Center
7 Bass Management
8 Noise Source
Note:
"Aux Center" is an additional center channel. To use the "Aux Center" channel, a special dedicated setting is
required; consult your installation service personnel.
4
Using the
The following screen appears:
Noise Source
1 Off
2 Left
3 Right
4 Surround L
5 Surround R
6 Center
7 Aux Center
8 LFE
5
Using the
The test signal will be produced from the selected channel.
"Sub Woofer / Bass Management"
Calling Up a Room
Sound Setting
buttons, select "Surround Setup", and press the ENTER button.
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Mute
off
buttons, select "Noise Source", and press the ENTER button.
buttons, select the channel, and press the ENTER button.
P30
28
Video and Audio
Adjusting
Timing
Surround Effects
Compensations
Front left channel
Front right channel
Rear left channel
Rear right channel
Center channel
Displaying the
Data Screen
Advertisement
Table of Contents
