Adjusting Surround Effects - Pioneer PDSP-1 Operating Instructions Manual

Changing
Adjusting the Tone
Surround Sound

Adjusting Surround Effects

Narrowing the audio width of the front right-left channels (Image width)
As a characteristic of the digital sound projector, when the room's right and left walls are far apart, some playback
sources may sound overly separated.
This function allows you to adjust the width of the sound image to a narrow perspective, thus producing a more
natural sound image.
Use the touch panel to select the
1
From the HOME menu press
Press the MENU button.
2
The "System Setup" menu screen appears.
Using the
3
The following screen appears:
Stereo Mode Menu
1 Image width
2 Image width value 1.00
3 PLII Mode
Using the buttons, select "Image width", then use the
4
5 Using the buttons, select "Image width value", then use the
value as desired; when done, press the ENTER button.
Setting range: 0.00 – 1.00 (1.00 when setting is OFF)
Notes:
Setting value 1.00 is for stereo sound (sound width spread to front right-left).
Setting value 0.00 is monaural (sound spread is narrowed and produced only from the center channel).
When you're finished, you can press the MENU button repeatedly to return to previous screens.
"Fine Tuning the PLII Music Mode"
Calling Up a Room
Sound Setting
PDSP menu.
; from other menus, press
buttons, select "Stereo Mode", then press the ENTER button.
On
PLII Movie
P35
34
Video and Audio
Adjusting
Timing
Surround Effects
Compensations
.
buttons to select "On".
buttons to adjust the
Displaying the
Data Screen