Turning On/Off The Alarm; Activating Snooze - Panasonic PP105106 Operating Instructions Manual

Turning ON/OFF the alarm

1
Hold down [ALM] for more than 2 sec-
onds.
2
Push [ALM].
3
Turn [VOL] (Volume) clockwise or
counterclockwise to select alarm ON or
OFF, then push [ALM] again to confirm
the setting.
(Select alarm ON, lights.)
Notes:
¡ Before turn ON the alarm, make sure the alarm
time is set. Failure to heed this will cause invalid
selection of alarm ON.
¡ Hold down [ALM] for more than 2 seconds when
the alarm is sounding also turns off the alarm.
¡ Access of alarm ON/OFF is available by push
[ALM] in the "Alarm time display".

Activating snooze

Press any button on this unit when the
alarm is sounding.
The alarm will sound again in 9 minutes.
Notes:
¡ If you do not turn the alarm off when the alarm is
sounding, the alarm sound will shut off after an
hour. (Including the amount of time the alarm was
postponed (snooze))
¡ If you connect with the optional wired remote
control unit (RSA-300), please notice the ALARM
button on RSA-300 only reflect the function of
Display Alarm Time. (It's not feasible for long key
operation)
(Alarm time display)
(Alarm ON/OFF setting)
35