PRECAUTION AND MAINTENANCE LOCATION OF CONTROLS oily hands. Do not touch exposed tape. Always store them in * This unit is designed for 13.8V DC Negative ground systems ONLY . The equipment is compatible, if the negative (-) their protective cases. terminal of the battery is connected to the vehicle’s metal Before inserting cassette tape, always inspect for tape slack body /chassis.
GENERAL OPERATION SPECIFICATIONS OPERATION OF CONTROLS 1. POWER ON/OFF button 2) Beep 2nd and I-Vol Selection 1. Press [PWR] button to turn power on. FM TUNER Press the button (1) to turn on the unit. When the power on, When the SEL button is pressed over 2 seconds, the unit will Tuning Range 87.5 - 107.9 MHz “Welcome”...
OPERATION OF CONTROLS OPERATION OF CONTROLS 18. PROGRAM Fast function 3.Volume Control button - To write operation To advance the tape quickly push this button until the lock to Turn left or right the spindle knob (3) to decrease or increase a.
Page 5
OPERATION OF CONTROLS OPERATION OF CONTROLS 8. TUNE DOWN button is complete and the display shows"SEARCH". Automatically station is memorized. To load a station from the memory bank 14. TIME/FREQUENCY (T/F) button 1) After your unit has been installed in your car, then turn - FM/AM Seek down six strong stations are stored on the station buttons 1 - 6.