Table of Contents
Advertisement
Alarm Setting
[ALM]
[VOL]
[s]/[d]
Alarm time setting
1
Hold down [ALM] (Alarm) for more than 2
seconds.
"ALM ADJ" is displayed when the alarm time is
not adjusted.
2
Hold down [ALM] for more than 2 seconds
after the above display is shown.
3
Adjust the hour.
[d] : Sets ahead.
[s] : Sets back.
4
Push [ALM].
5
Adjust the minute.
[d] : Sets ahead.
[s] : Sets back.
6
Push [ALM] to complete.
The alarm is set to ON automatically after com-
plete alarm time setting.
Alarm indicator ( ) lights.
20
Notes:
The procedure of alarm time setting under Siri-
¡
usXM radio mode is different with above step 1,
refer page 18 for its instructions.
When the clock
¡
(Alarm time
and complete the alarm time setting, the clock
display)
time will set to "PM 1:00" automatically. Please
readjust the clock time depending on the actual
clock time.
Hold down [d] or [s] to change numbers
¡
rapidly.
When you want to readjust the alarm time, repeat
¡
steps 1 to 6.
Hour blinks
Turning ON/OFF the alarm
1
Hour entered
2
Minute blinks
3
(Select alarm ON,
Notes:
Before turn ON the alarm, make sure the alarm
¡
time is set. Failure to heed this will cause invalid
Minute entered
selection of alarm ON.
Hold down [ALM] for more than 2 seconds when
¡
the alarm is sounding also turns off the alarm.
Access of alarm ON/OFF is available by push
¡
Completed
[ALM] in the "Alarm time display".
Activating snooze
Press any button on this unit when the alarm
is sounding.
The alarm will sound again in 9 minutes.
Note: If you do not turn the alarm off when the
alarm is sounding, the alarm sound will shut off af-
ter an hour. (Including the amount of time the alarm
was postponed (snooze))
DISP
DISP
(a
page 9) is not set, perform
Hold down [ALM] for more than 2 sec-
onds.
Push [ALM].
Turn [VOL] (Volume) clockwise or counter-
clockwise to select alarm ON or OFF, then
push [ALM] again to confi rm the setting.
lights.)
(Alarm time
display)
(Alarm ON/OFF
setting)
Hide quick links:
Advertisement
Table of Contents
