Four Channel Receiver Features - Pyle PDWM 4520 Manual

FOUR CHANNEL RECEIVER FEATURES

5 5
1 2 3 4 3
Front Panel
6 7
Rear Panel
1.Power Button: Power ON/OFF the receiver.
2.Power Indicator: Indicate the power ON/OFF.
3."AF"Audio Level Indicator: Indicate the wireless system audio signal level.
4.Volume Knob: Adjust the volume output of receiver.
5."RF" signal Indicator:It glows when the Receiver receive RF signal from
Transmitter.
6.Antenna A/B.
7.1/4" Audio Output Jack: Connect the audio cable from this jack to the input
port of amplifier, mixer.
8.XLR Balanced Output Jack: Connect the audio cable from this jack to the input
port of amplifier, mixer.
9.Power Jack: Connect the DC adapter to receiver.
6
5 5
4 3 4 3 4
8 9 6
3
Pyle PDWM4520 Wireless Microphone System, UHF Quad Channel Fixed
Frequency, 4 Handheld Microphones, Rack Mountable
UHF Band Receiver System
Quad Frequency Channel Design (Channel 1, 2, 3, 4)
Broad Frequency Response Range & Low Distortion
High Signal/Noise Ratio Performance
RF Signal & AF Signal LED Indicators
Radio Frequency and Audio Frequency
Independent Channel Adjustable Volume Controls
Detachable Dual Antennas
Rack Mountable System
Includes (4) Handheld Microphones
4 XLR Output Connector Jacks
System Receiver:
RF Frequency Range: 673 - 697.8MHz
Image & Spurious Rejection: >70dB
Receiving Sensitivity: -105dBm
Signal/Noise Ratio: >85dB
Border Upon Channel Rejection: >70dB
T.H.D.: <0.5%
Audio Output Level: 0-300mV
Power Requirements: 12-15V DC nominal 1000mA
Dimensions (L x W x H): 15.51'' x 9.25'' x 2.16''
Microphones:
RF Power Output: >10dBm
Modulation Type: FM
Max. Deviation: +/- 40kHz
Nominal Power Current: <40mA
Spurious Emission: >55dBc
Battery Powered: 2 x 'AA' Batteries (Included)
Batteries Included
Weight: 180g
12