Philips Vari-Lite VL4000 Service Manual page 32

❋
VARI LITE - VL4000 S
Step 5. To remove lamp, grasp lamp base by hand, twist lamp counter-clockwise until lamp's tabs
align with slots in lamp socket (see
remove lamp by pulling it straight out of socket.
Step 6. Remove replacement lamp from shipping box.
Step 7. As shown in
Step 8. Install lamp fully into lamp socket, taking care not to touch lamp glass.
Step 9. Turn lamp clockwise to seat lamp into socket. Lamp base should be aligned as illustrated in
Figure
Step 10. Reinstall lamp socket cover. Make sure safety tether is completely encapsulated within lamp
socket cover.
14
L S
POT UMINAIRES ERVICE
Figure 2-2, align replacement lamp tabs with lamp socket.
Figure 2-2: Lamp Installation
2-3.
Figure 2-3: Installed Lamp
M
ANUAL
Figure 2-2 on page 14 for more information), and
Align tabs of lamp with
socket when installing
Lamp*
Note alignment of fully seated lamp
NOTE: * "Bow" of lamp must
be oriented with "Slot" in
reflector.
Bow
Lamp Socket Cover
Lamp
Ensure lamp is completely
seated before reinstalling lamp
socket cover.
02 .9 704.00 10 0