Philips Vari-Lite VL4000 Service Manual page 35

R M
OUTINE AINTENANCE
Step 4. At fixed color wheel, slowly rotate wheel by hand until filter to be removed is visible on
assembly as shown in
Step 5. At filter to be removed, (1) press filter out of fixed color wheel with fingers and (2) guide
filter up and away from fixed color wheel.
Fixed Color Filter
Step 6. Install replacement filter into slot. Note orientation of fixed color filter as indicated in
2-6. Make sure filter is inserted and secured by fixed color wheel retaining clip as shown in
Figure
Step 7. After filter is installed, reinstall head cover(s).
02.97 04.001 0 0
P : F C
ROCEDURES IXED
Figure 2-5.
Figure 2-5: Removing Fixed Color Filters
2-6.
Fixed Color Filter
Figure 2-6: Installing Fixed Color Filters
W F R
OLOR HEEL ILTER
Pull filter straight up and away
2
from wheel assembly
Fixed Color Filter Orientation
Fixed Color Filter Retaining Clip
Fixed Color Wheel Assembly
Open Position
(no filter)
I
EMOVAL AND NSTALLATION
Push filter from front
1
of wheel to dislodge it
from wheel assembly
Fixed Color Filter
VERY IMPORTANT!
Rear of filter is the REFLECTIVE
side and MUST be towards
lamp.
Note:
Assembly shown for clarity.
2
Figure
17