Advertisement
Calibration Method:
Turn off the meter. Keep the
and press
key to turn on the power. When display
indicate symbol "CAL" to enter calibration Mode. The
indication reading should be 18.4% (±0.5). If need to
calibrate, please use screwdriver to calibrate from right-side
of meter.
※ After calibration, please turn off the meter to save .
【Notice】 The calibration reading will have deviations in
the operation ambient.
【Notice】 When calibration, please make sure the probe
suspended in midair and can't contact any
object.
- 6 -
MODE (CAL) key pressed
D. The LCD Display
Low battery
MAX Value
Hold Value
Recording Mode
Calibration Mode
Manual Power Off
MIN Value
Recording value warns
No. of Calibration Table
Moisture Value
- 3 -
Advertisement
