General MM70 User Manual

MM70- English only manual-2P-060408:Layout 1
CARE AND MAINTENANCE:
1. The instrument has an accurate temperature compensation
function, but in a high temperature or high humidity
environment, it may produce diference or a wrong message.
2. The sensor (needles) is the electric conduction element of
connecting the measured material. In order to avoid damage to
the instrument and electric shock, when the measured material
has voltage or static electricity, please clear the voltage or cut
off the power and then go to measure.
3. Please push the two needles into the material at the same time
and keep them inserted for a while to get a more accurate value
reading.
4. For hard material, or if the material needs deep inspection,
please use the special needle (option).
5. To avoid an incorrect reading, if the low power symbol appears,
please replace the battery before using.
6. The sensor (needles) is the main element. If the sensor is
damaged or has other problems, please replace with a new one
to use continually.
7. When not in use, remove the battery from the instrument and put
and all its accessories into the protection case. Store the kit in a
dry, dust-free environment out of direct sunlight.
8. Please contact your local agent or our customer service
department for any question(s) or product repair.
GENERAL TOOLS & INSTRUMENTS
80 White Street
New York, NY 10013 - 3567
PHONE (212) 431 - 6100
FAX (212) 431 - 6499
TOLL FREE (800) 697-8665
e-mail: sales@generaltools.com
www.generaltools.com
MM70 User's Manual
Specifications subject to change without notice
©2008 GENERAL TOOLS & INSTRUMENTS
NOTICE - WE ARE NOT RESPONSIBLE
FOR TYPOGRAPHICAL ERRORS.
MAN#MM70 6/08
6/6/08
™
™
11:41 AM Page 1
MM70
USER'S MANUAL
Precision LED
Moisture Meter