PC SETUP
When using the remote control, aim it at the remote control sensor on the set.
Connecting with a D-sub 15-pin Cable
Connect the signal cable from the monitor output
1
socket of the PERSONAL COMPUTER to the PC
input socket of the set.
2
Connect the audio cable from the PC to the AUDIO
IN(RGB/DVI) socket of the set.
Press the INPUT to select RGB-PC.
3
4
Switch on the PC, and the PC screen appears on
the set. The set can be operated as a PC monitor.
NOTE
Connect the signal input cable and tighten it by turning the
screws clockwise.
2
1