Programming The Remote Control; Programming Codes - LG M2080D Owner's Manual

PROGRAMMING THE REMOTE CONTROL

The remote is a multi-brand or universal remote. It can be programmed to operate most remotely con-
trolled devices of other manufacturers. Note that the remote may not control all models of other brands.
Programming a Code into the Remote
Test your remote control.
1
To find out whether your remote control can operate the component without programming, turn on
the component such as a VCR and press the corresponding mode button (such as a DVD or VCR)
on the remote control, while pointing at the component. Test the POWER and CH
see if the component responds properly. If not, the remote requires programming to operate the
device.
2 Turn on the component to be programmed, then press the corresponding mode button (e.g. VCR
or DVD) on the remote control. The remote control button of the desired device is lights up.
3
Press MENU and MUTE simultaneously, and then remote control is ready to be programmed with
the code.
4
Enter a code using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. Again, if the code is correct, the
device will turn off.
5
Press MENU to store the code.
Test the remote control functions to see if the component responds properly. If not, repeat the process
6
from step 2.

PROGRAMMING CODES

DVD
%UDQG &RGHV
$3(; ',*,7$/ 
'(121  
*(  
+$50$1 .$5'21 
-9& 
/*    
0$*1$92; 
0$5$17= 
0,768%,6+, 
%UDQG &RGHV
1$' 
21.<2  
3$1$621,&  
3+,/,36 
3,21((5  
352&((' 
3526&$1  
5&$  
6$0681*  
buttons to
%UDQG &RGHV
621< 
7+203621  
726+,%$  
<$0$+$  
=(1,7+