Appendix B: Troubleshooting; The Front Panel Indicators - Pioneer DRM-6NX Operating Instructions Manual

Appendix B: Troubleshooting

This section provides useful information to resolve
difficulty you may experience with your DRM-6NX:
÷ The front panel indicators
÷ Errors when accessing the DRM-6NX
÷ Problems running CD-ROM software
÷ Difficulties locating the DRM-6NX in NetWare
÷ Problems locating the domain controller in SMB
÷ Problems when accessing disc changers
÷ Restoring the factory default settings
÷ The others
The latest information regarding this product is
provided at
http://wwwbsc.pioneer.co.jp/is/products/index.html
United States http://www.pioneerusa.com
Europe http://www.pioneer-eur.com/product.htm

The Front Panel Indicators

The front panel indicators show the status of the DRM-
6NX. The indicators have the following functions:
÷ Status - Flashes during startup (When the DRM-6NX
is ready for use, the light goes out. The LED remains
off, unless an error condition occurs.)
÷ HDD - Flashes to indicate hard disk activity and SCSI
activity
Caution!
Never turn off the power when the hard disk
drive is active (while a HDD indicator is flashing)
÷ Network - Flashes to indicate the presence of network
traffic
÷ CHANGER - Lit when data is read from the internal
changer and when the SCSI bus is accessed
÷ Power - Indicates that power is connected to the
DRM-6NX (This LED remains lit and is only used
to indicate power is present in the DRM-6NX unit)
Normal Conditions
The Power LED is hardware-controlled and is always lit
when power is connected
This table shows the other front panel indicators under
normal conditions:
Event
Initial power to unit
During power-up/Self-test.
Approx. 30 seconds.
After power-up/Self-test
First disc inserted
Last disc removed
Network Packet arrived
Flash loading
* The Network LED flashs when there is network traffic
Status LED HDD LED Network LED
ON ON ON
Flash OFF OFF
OFF ON Flash*
OFF ON Flash*
OFF OFF Flash*
OFF N/A Flash*
1 Flash/sec 1 Flash/sec 1 Flash/sec
<DRB1239>
45