Web Browser (Http); Network Settings - Pioneer DRM-6NX Operating Instructions Manual

Web Browser (HTTP)

This section describes how to configure the DRM-6NX
for use via the web interface
The DRM-6NX supports HTTP over TCP/IP, which means
that the changer works as a web server and is available
on the Internet and intranets.
If you are using the DRM-6NX in a multiprotocol
environment, proceed to the other relevant sctions of
the manual:
÷ pp. 18 – 19 - Microsoft & IBM Networks (SMB)
÷ pp. 20 – 24 - NetWare (NCP)
÷ pp. 25 – 26 - UNIX (NFS)

Network Settings

Use the Administration pages within the PIONEER
Network Cache Changer DRM-6NX web interface to
configure the DRM-6NX. Refer to " Accessing the DRM-
6NX Web Pages " on page 16.
Wizard
The installation wizard is a convenient way to set up
the DRM-6NX for your network environments.
1. Click Network Settings
2. Click Wizard
3. Choose Web (HTTP) to enable Web browser access
Click Start to proceed with the installation. Follow
the instructions on the screen
4. Click Close upon completion
5. Click Detailed View
the configuration parameters
NOTES:
7 Disable all protocols that are not intended for use with your
system setup
7 Online help
is available for all parameters
7 The parameter list is described in"Appendix A - Parameter List"
on page 40
to verify the settings and edit
<DRB1239>
27