Connections - Pioneer DRM-6NX Operating Instructions Manual

Connections

Before making or changing the connections, switch
off the power switch and disconnect the power
cord from the AC outlet.
Ethernet
Hub
Turn off SCSI terminator No. 1 when disk
drives are connected to the SCSI terminal.
Then turn on the terminator of the connected
disk drive.
10
<DRB1239>
RJ-45 connector
10BASE-T/
100BASE-TX
SCSI cable
PIONEER CD/DVD-ROM drives
NOTE:
Assign SCSI IDs 2 to 6 to drives
connected to the SCSI terminal.
Power cable
The accessory power cable is for use in North America.
In other regions, please consult your dealer for
information on how to purchase a power cable.
To AC wall outlet
Connect to a wall outlet. This unit is
designed to operate at AC 110 – 240 V
50/60 Hz. (There is no power supply
voltage switch because switchover
takes place automatically inside the unit.)