Sirius XM RAdio Onyx Plus User Manual page 15

Vehicle Installation
tighten the knob .
Knob Adhesive Foot
4. Attach the Adhesive Mount to the PowerConnect Vehicle Dock using
the 4 provided screws .
5. Before you attach the Adhesive Mount to the
dash, skip ahead and finish the remainder of
the vehicle installation so that the cables are
attached to the dock .
6. Once the cables have been attached to the
dock, clean the mounting surface in the vehicle
with the alcohol preparation pad and let it dry
thoroughly .
7. Peel off the adhesive liner . Position,
press, and hold the Adhesive Mount
in place for 30 seconds .
IMPORTANT! Allow the Adhesive
Mount adhesive to cure (dry) for a
minimum of 2-4 hours before using the
mount . The best adhesion occurs after
24 hours .
TIP! To remove the Adhesive Mount, carefully lift the adhesive pad with your
fingers or a spoon . Warming the pad with a hair dryer for several minutes will
help soften the adhesive .
Dock Mounting Plate
15