Setting Up From Pc - Hitachi SINELINK 24G User Manual

SINELINK24G

2-2 Setting up from PC

(1) Confirm a setting environment.
Please confirm the following content.
PoE-PSE(Power over Ethernet - Power Sourcing Equipment)
* It is a state of feeding power to this product.
LAN cable
* The length of the cable from this device to the switching HUB is within 100m in
total.
* Straight cable for both LAN cables from this product to switching HUB.
(Switching HUB corresponding to Auto MDI/MDI-X can be connected also with
cross-over cable.
Switching HUB
* Support for 100BASE-TX (100Mbps full duplex)。
* Auto negotiation or 100Mbps(Full-Duplex) fixation for setting of connected port
with this product.
* Connected port with this product is linked by 100Mbps full duplex.
* Connected port with PC is linked.
PC for Setting
* OS： Microsoft Windows XP/2000 Professional
* WWW Browser： Microsoft Internet Explorer 6.0 SP1 or above.
When OS and WWW Browsers other than specification are used, this device
might not work normally. Please use specified OS and a WWW browser.
(2) Change IP Address of PC for setting.
Change IP Address and Subnet Mask of PC for setting to the following values.
* IP Address:
* Subnet Mask: 255.255.255.0
Factory Default of SINELINK 24G
* IP Address:
* Subnet Mask: 255.255.255.0
192.168.0.1 ~ 192.168.0.254 (without 192.168.0.202)
192.168.0.202
6