JVC KV-DV7 Service Manual page 7

Removing the main board
Prior to performing the following procedure, remove
the top cover, the front panel assembly and the DVD
mechanism assembly.
1. Disconnect the wire from connector CN781 on the
main board.
2. Remove the three screws G on the top of the body.
3. Remove the screw H on the back of the body.
4. Disengage the joint d in the lower right part of the
rear panel and remove the rear panel with the main
board (The fan assembly will be detached with the
rear panel).
CAUTION: When reattaching, engage the joint c to
place the rear panel on the back of the
bottom chassis.
5. Remove the two screws I and J attaching the main
board to the rear panel.
J
Fig.15
(See Fig.12 to 15)
Rear panel
I
Main board
G
Fig.12
H
Fig.13
Rear panel
Joints d
Fig.14
KV-DV7
Rear panel
CN781
Bottom chassis
Rear panel
Main board
1-7