JVC KV-DV7 Service Manual page 5

Removing the front panel assembly
Prior to performing the following procedure, remove
the top cover.
1. Remove the screw B attaching the ground on the
top of the body.
2. Remove the four screws C
attaching the front panel assembly on both sides of
the body.
3. Release the two joints b of the front panel assembly
and the bottom chassis on both sides of the body
and remove the front panel assembly toward the
front.
The connector CN801 on the control switch board in
the front panel assembly will be disconnected from
the main board.
CAUTION: When reassembling, attach the four
screws C and then the two screws C'.
(See Fig.4 to 6)
and two screws C'
Front panel assembly
Front panel assembly
Fig.4
C
C'
Joint b
C
Fig.5
C
C'
Joint b
C
Fig.6
KV-DV7
B
Front panel assembly
1-5