JVC KV-DV7 Service Manual page 8

KV-DV7
Removing the fan assembly
Prior to performing the following procedure, remove
the top cover, the front panel assembly and the DVD
mechanism assembly.
REFERENCE: It is not unnecessary to remove the main
board and the rear panel.
1. Disconnect the wire from connector CN781 on the
main board.
2. Remove the two screws K on the back of the body.
Removing the control switch board
Prior to performing the following procedure, remove
the top cover and the front panel assembly.
1. Remove the three screws L attaching the control
switch board on the back of the front panel
assembly.
2. Disengage the three joints e of the front panel and
the control switch board.
1-8
(See Fig.16 and 17)
(See Fig.18)
Fan assembly
Rear panel
Fig.16
K
Fan assembly
Fig.17
Front panel assembly
Joint d
Joint e
L
L
Control switch board
Fig.18
CN781
Rear panel
L
Joint e