Using The On-Screen Displays; Playing Discs - Pioneer S-DV180 Operating Instructions Manual

Pioneer dvd/cd receiver/speaker system operating instructions
Hide thumbs Also See for S-DV180:
Table of Contents

Advertisement

04
Getting started
5
Use the VOLUME +/– to adjust the
volume to an appropriate level.
Use / to adjust the channel levels in
6
turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ±10 dB.
7
When you're done, press ENTER to exit
test tone setup.

Using the on-screen displays

For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
All the screens are navigated in basically the
same way, using , , ,  to change the
highlighted item and pressing ENTER to select
2
it.
Important
• Throughout this manual, 'Select' means
use the cursor buttons to highlight an item
on-screen, then press ENTER.
Button
What it does
HOME
Displays/exits the on-screen display.
MENU
 Changes the highlighted menu
item.
ENTER
Selects the highlighted menu item.
RETURN
Returns to the main menu without
saving changes.
Tip
• The button guide at the bottom of every
OSD screen shows you which buttons
you'll need to use for that screen.
Note
1 When the volume is set to 51 or more, TESTTONE cannot be selected and the channel level setting range is restricted. In ad-
dition, if the channel level range of any speaker is set to the + side, the maximum volume is also restricted.
2 The screen saver will appear after five minutes of inactivity.
18
En

Playing discs

1
The basic playback controls for playing DVD,
CD, Video CD/Super VCD, DivX video/WMV
and WMA/MP3/MPEG-4 AAC discs are
covered here. Further functions are detailed in
chapter 6.
• Throughout this manual, the term 'DVD'
means DVD-Video, DVD-R and DVD-RW.
1
If the player isn't already on, switch it on.
If you're playing a disc with video, also turn on
your TV and make sure that it is set to the
correct video input.
2
Press  OPEN/CLOSE to load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc (if you're
loading a double-sided DVD disc, load it with
the side you want to play face down).
3
Press  (play) to start playback.
If you're playing a DVD or Video CD/Super VCD,
a menu may appear. See DVD-Video disc
menus and Video CD/Super VCD PBC menus on
page 19 to navigate these.
If you loaded a disc containing JPEGs, a
slideshow will start. See Playing a JPEG
slideshow on page 25 for more on this.
• If a disc contains a mixture of DivX video/
WMV and other media file types (MP3, for
example), first select whether to play the
DivX video/WMV files (DivX/WMV) or the
other media file types (MP3/WMA/JPEG/
MPEG-4 AAC) from the on-screen display.
Important

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents