Frequency Step Setting; Dimming The Display; Setting The Key Lock - Pioneer S-DV180 Operating Instructions Manual

13 Additional information
4 Press ENTER while CHANGE is blinking.
The system will automatically enter standby
mode, then turn on again. You'll see the new TV
system setting in the display after seeing
1
POWER ON.
Media Type
DVD/Super VCD/
Video CD/DivX
video/WMV
CD/MP3/WMA/
MPEG-4 AAC/
JPEG/no disc

Frequency step setting

Not applicable to Saudi Arabia, Israel, South
Africa, other middle eastern contries and duty
free models
If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1 Press SHIFT+SETUP.
Use / to choose AM 9K/10K then
2
press ENTER.
Use / to select AM 9K or AM 10K then
3
press ENTER.

Dimming the Display

You can adjust the brightness of the text in the
front panel display.
1 Press SHIFT+SETUP.
Use / to select SYS SET then press
2
ENTER.
Use / to select DIMMER then press
3
ENTER.
This is shown in the front panel display.
Use / to select LIGHT or DARK then
4
press ENTER.
Note
1 You have to switch the player into standby (press  STANDBY/ON) before each change.
52
En
Player setting
Format NTSC PAL AUTO
NTSC
NTSC PAL NTSC
PAL
NTSC PAL PAL
—
NTSC PAL NTSC or
PAL

Setting the Key Lock

You can disable the front panel buttons by
switching the Key Lock feature on.
1 Press SHIFT+SETUP.
Use / to select SYS SET then press
2
ENTER.
Use / to choose KEYLOCK then press
3
ENTER.
Use / to select LOCK ON or LOCK OFF
4
then press ENTER.