Table of Contents
Advertisement
Race Master
7
Installation
Warning: The Race Master must be mounted within 20 degrees of the
vertical to permit correct functioning of the integrated compass sensor.
Ideally, the display should be mounted at or below eye height; if this is
not possible it may be necessary to adjust the display contrast to
optimise visibility (see page 16).
Select a mounting location that is as far as possible from magnetic
objects that might interfere with the compass sensor.
Attach the Cradle to a suitable bracket or bulkhead using the bolts or
screws supplied. Take care to ensure the plane of the cradle is at right
angles to the centreline of the vessel, minor mis-alignment may be
corrected by following the Calibration process (see page 17).
18
Hide quick links:
Advertisement
Table of Contents
