Editing Setup Data; 5.4 Setup Parameter Descriptions - Raymarine Race Master User Manual

Race Master
5.3

Editing Setup Data

Parameter values may be one of three types:
A user editable numeric value (for example, the magnetic variation
may have the value 03 degrees).
To edit a numeric parameter value:
Press
Use
Press
A list of options (for example, the heading response parameter may
have the values SLO , mED or FASt).
To select a parameter option from a list:
Press
Use
Press
A toggle between two alternative options (for example the keylock
parameter can be either ON or OFF).
To toggle between alternate parameter settings
Press

5.4 Setup Parameter Descriptions

In the descriptions below, system default values are shown in bold text
Compass Chapter
Heading Response
Compass Offset
14
. The value data will begin to flash.
and to adjust the value.
again to set the new value.
. The parameter option will begin to flash.
and to select the option required.
again to set the new option.
. The setting will toggle between the options.
Sets the update period of the compass display.
Auto (automatic), SLO (slow), mED (medium), FASt (fast).
Aligns the displayed heading with the actual magnetic heading of
the boat (see page 17 for the calibration process).
The live heading is shown on the lower line of the bottom pane,
with the applied offset on the upper line shown as +/- degrees (0
to +/- 180).