Adding - WDS My Cloud Home Duo User Manual

1. As is illustrated above, reveal the hard drives by opening the top lid from the
rear edge.
2. Each hard drive is latched in place by an attached tray and the tray has a plastic
latch on one end.
▪ Gently press down on the plastic latch with your index finger so that it
unlatches from the metal frame of the device.
▪ While gently pressing down on the plastic latch, grab the plastic tray with
your fingertips and gently pull. The tray and hard drive should easily lift up or
slide out.
3. Once the hard drive and tray combination are completely removed from the
unit, remove the plastic tray from the hard drive.
▪ The tray is attached to the hard drive with four pins.
▪ As is illustrated above, gently flex the tray so that the pins come out of the
sides of the hard drive. Remove and save the tray.
to WD with the tray. The tray will not be returned to you.

Adding

Before adding a hard drive to your My Cloud Home Duo device, make sure there is
no hard drive in the slot where it will be installed. If you need to first remove a hard
drive, follow the instructions above.
My Cloud Home / My Cloud Home Duo
User Manual
Additional Features & Functions
return a hard drive
Do not
33