Control And Status; Atq Result Code Suppression; Ats0 Automatic Answer Control - Sony Ericsson GM47 User Manual

3. Control and Status

3.1 ATQ
Note!
3.2 ATS0
LZT 123 7263 R1A
Result Code Suppression
Description
Set Result Code
Suppression
Read the current
setting
Show if the command
is supported
Determines whether or not the DCE transmits result codes to the DTE.
When result codes are being suppressed, no portion of any intermediate,
final, or unsolicited result code - header, result text, line terminator, or
trailer - is transmitted.
The Ingo-module triggers on the response from ref. Point E. It is
therefore not possible to turn off the response in ref. Point E.
<value> Description
0 DCE transmits result codes. Default value
1 Result codes are suppressed and not transmitted
Automatic Answer Control
Description
Automatic answer
control
Read the current
setting
Show if the command
is supported
Defines the automatic answering feature of the modem. A non-zero
value specifies the number of rings before the call is answered.
Command
ATQ[=]<value>
ATQ?
ATQ=?
Command
ATS0=[<rcnt>]
ATS0?
ATS0=?
Possible Responses
• OK
• ERROR
Q: <value>
Q: (list of supported
<value>s)
Possible Responses
• OK
• ERROR
<rcnt>
S0: (list of supported
<rcnt>s)
95