At+Gmr Read Revision Identification; Ati Identification Information - Sony Ericsson GM47 User Manual

11.12 AT+GMR
11.13 ATI
194
GM47/GM48 INTEGRATOR'S MANUAL
Read Revision Identification
Description
Request revision
identification
Test if command is
supported
This command returns a manufacturer specified software revision name
in a text string.
<revision> Description
string type The total number of characters, including line terminators,
in the information text returned in response to this
command shall not exceed 2048 characters. Note that
the information text shall not contain the sequence "0" or
"OK", so that DTE can avoid false detection of the end of
this information text
Identification Information
Description
Execute
This command causes the DCE to transmit one or more lines of text,
followed by a final result code. As an option, <value> can be used to
select from among multiple types of identifying information as shown
in the table below.
This command provides compatibility with Microsoft Windows 95.
<value > Description
0 Same information as +GMM command (model
identification)
1 Same information as +GMR command (revision
identification)
3 Modem model description
5 Active settings
7 Modem configuration profile (brief listing of the modem
functionality: fax classes, Bluetooth, IrDA, modem type,
etc.)
8 DCE hardware type version
9 PnP (plug and play) information
10 Same information as +GMI command (manufacturer
identification). Not supported
Command
AT+GMR
AT+GMR=?
Command
ATI[<value>]
Possible Responses
<revision>
• OK
• ERROR
Possible Responses
<information>
LZT 123 7263 R1A