Control And Status; Atq Result Code Suppression; Ats0 Automatic Answer Control - Sony Ericsson TT4031 (SE-GM29) Owner's Manual

Control and Status

3.1 ATQ Result Code Suppression
Description
Set Result Code
Suppression
Read the current setting ATQ?
Show if the command is
supported
Determines whether or not the DCE transmits result codes to the DTE. When
result codes are being suppressed, no portion of any intermediate, final, or
unsolicited result code - header, result text, line terminator, or trailer - is
transmitted.
<value>
0
1

3.2 ATS0 Automatic Answer Control

Description
Automatic answer
control
Read the current
setting
Show if the command
is supported
Defines the automatic answering feature of the modem. A non-zero value
specifies the number of rings before the call is answered.
Note! Call is always answered in the current fax class,
regardless of whether the incoming call is voice, data, or
fax.
Owner's Manual
Command
ATQ[=]<value>
ATQ=?
Description
DCE transmits result codes. Default value
Result codes are suppressed and not transmitted
Command
ATS0=[<rcnt>]
ATS0?
ATS0=?
Rev 1.0
Possible Responses
•_ OK
•_ ERROR
Q: <value>
Q: (list of supported
<value>s)
Possible Responses
•_ OK
•_ ERROR
<rcnt>
S0: (list of supported
<rcnt>s)
Page 71 of 71