Mercury 200 Pro XS Operation, Maintenance And Installation Manual page 70

2. Remove the hose cable tie and pull the air filter off the hose.
a
b
c
d
e
a - Air filter
b - Nylon washer
c - Rubber washer
d - Clamp
e - Filter housing
f - Cable tie
INSTALLATION
1. Place the nylon washer and rubber washer onto the air filter and insert the
filter into the housing. Rotate the filter 1/4 turn to the lock position.
2. Position the filter housing so the inlet hose is facing towards the back of
the engine. Install the hose and secure with a cable tie.
MAINTENANCE
f
60
28732
eng