Focus; Front Surround; Power Control; No Signal Off - Pioneer Elite PRO-1140HD Operating Instructions Manual

Adjustments and Settings

FOCUS

Focus shifts the sound-source direction (sound image) upward
and produces clear sound contours.
1
Press HOME MENU.
2
then ENTER)
Select "Sound". ( /
3
Select "FOCUS". ( / )
4
Select the desired parameter. ( / )
Item Description
Off Deactivates FOCUS
On
Activates FOCUS
5
Press HOME MENU again to exit the menu.

Front Surround

Front Surround provides three-dimensional sound effects and/
or a deep, rich bass.
1
Press HOME MENU.
2
then ENTER)
Select "Sound". ( /
3
Select "Front Surround". ( / )
4
Select the desired parameter. ( / )
Item Description
Off Deactivates both SRS and TruBass
SRS Reproduces highly effective three-dimensional sound
TruBass Provides deep, rich bass using a new technology
(factory default)
TruBass + SRS Provides both TruBass and SRS effects
5
Press HOME MENU again to exit the menu.
NOTE
• (WOW) FOCUS is on and TruBass + SRS is selected
for Front Surround
• trademark of SRS Labs, Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.

Power Control

Power Control provides convenient power saving options.

Energy Save

There are three Energy Save modes to reduce power
consumption.
1
Press HOME MENU.
2
Select "Power Control". ( /
3
Select "Energy Save". ( /
4
Select "Save1", "Save2" or "Picture Off". ( /
ENTER)
Item Description
Standard Maximum picture brightness; may increase glass
panel buzzing
Save1 Slightly reduced power consumption and brightness;
optimal setting for most uses
Save2 Lowest power consumption; slightly decreased
brightness
Picture Off Deactivates the screen to save power. To restore the
screen display, press any button other than VOL +/–
and MUTING.
This setting is not memorized by the system.
5
Press HOME MENU again to exit the menu.
NOTE
• When the signal is coming from a PC, use the Home menu
to set this option.
No Signal off (AV mode only)
The system automatically enters Standby if no signal is
received for 15 minutes.
1
Press HOME MENU.
2
Select "Power Control". ( /
3
Select "No Signal off". ( /
4
then ENTER)
Select "Enable". ( /
Item Description
Disable Does not place the system into Standby
(factory default)
Enable Places the system into Standby if no signal is
received for 15 minutes
5
Press HOME MENU again to exit the menu.
NOTE
• Five minutes before the system is placed into Standby, a
message appears as each minute counts down.
• The system may not enter Standby if the TV program signal
has a high video noise level.
then ENTER)
then ENTER)
then
then ENTER)
then ENTER)
11
63
En