Manual Setup; Manual Image Position And Clock Adjustments (Pc Mode Only); Selecting A Screen Size Manually - Pioneer Elite PRO-1140HD Operating Instructions Manual

Adjustments and Settings
Manual image position and clock
adjustments (PC mode only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1
Press HOME MENU.
2
then ENTER)
Select "Option". ( /
3
Select "Manual Setup". ( /
4
Select an item to be adjusted. ( /

Manual Setup

H/V Position Adjust
Clock
Phase
Reset
5
Perform adjustment. ( /
• With "Clock" or "Phase" selected, you can change the
parameter using / .
6
Press HOME MENU again to exit the menu.
NOTE
• To restore all factory defaults, press
step 4 then press ENTER. A confirmation screen appears.
to select "Yes" then press ENTER.
Press /
then ENTER)
then ENTER)
0
0
or / )
/ to select "Reset" in

Selecting a screen size manually

In single-screen mode, press SCREEN SIZE to change the size
of the screen. The Video signal determines the available screen
size options.
• The selectable screen sizes differ depending on the type of
input signal.
AV mode
Item Description
4:3 For 4:3 "standard" pictures (side bar appears on each
side)
FULL
For 16:9 squeezed pictures
ZOOM
For 16:9 letterbox pictures (bars may appear on the top
and bottom on some programs)
CINEMA For 14:9 letterbox pictures (bars may appear on the top
and bottom on some programs)
WIDE In this mode pictures are stretched to fill the screen,
side to side
NOTE
• Avoid displaying signals that do not completely fill the
screen. This may cause temporary or permanent image
retention depending on the frequency and duration.
PC mode except for XGA signals
Item Description
4:3
Fills the screen without altering the input signal aspect
ratio
FULL
Full 16:9 screen display
Dot by Dot Matches input signal to the same number of screen
pixels
PC mode for XGA signals
(Ex. 1024 × 768 input with PRO-1140HD/PRO-1540HD)
Item Description
4:3 Matches input signal to the same number of screen
pixels
Optimized for 1024 × 768 display
FULL1 Full 16:9 screen display
Optimized for 1024 × 768 display
FULL2 For wide signal display
Use when displaying 1360 × 768 signal resolution
NOTE
• In 2-screen mode, press SCREEN SIZE to change the size of
the left screen.
• For the PRO-940HD the number of panel pixels is different.
Signal processing and actual viewing conditions vary
slightly.
11
65
En