Charging The Collar - Garmin Tri-Tronics PRO70 Owner's Manual

2
Plug the small end of the power cable
into the mini-USB port
device.
3
Plug the other end of the power cable
into an appropriate power source.
The status LED is solid red when the
device is charging.
4
After the status LED turns solid green,
unplug the power cable from the
device.
4

Charging the Collar

To prevent corrosion, thoroughly dry the
contacts on the collar and the surrounding
area before connecting the charging clip.
You should fully charge the battery before
you use the device for the first time or
whenever the battery is low (page 11). It
is normal for the battery to discharge in
approximately 7 to 10 weeks when the
device is not in use. Charging a fully
depleted battery takes about 2 hours.
on the NOTE: The device will not charge when
Á
outside the temperature range of 32° to
104°F (0° to 40°C).
1
Snap the charging clip
device
NOTICE
onto the
À
.
Á