Table of Contents
Advertisement
Section 3 - Configuration
To configure IPv6 rules, on the Static Routes page click IPv6. To return to the
main IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Rules button. Click Save when you are done. If
you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule.
DestNetwork:
This is the IP address of the router used to reach the specified
destination.
PrefixLen:
Enter the IPv6 address prefix length of the packets that will take this
route.
Gateway:
Enter your next hop gateway to be taken if this route is used.
Metric:
Enter a route metric value ranging from 0 to 15. This value indicates
the cost of using this route.
Interface:
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Apply when you are done.
D-Link COVR-3902 User Manual
IPv6
82
Hide quick links:
Advertisement
Table of Contents
