Table of Contents
Advertisement
Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
Choose Share with IPv4 to re-use your IPv4 PPPoE username and
PPPoE Session:
password, or Create a new session.
Address Mode
Select Static IP if your ISP assigned you an IP address. In most cases,
select Dynamic IP.
If you selected Static IP as the Address Mode and Share with IPv4 as the PPPoE Session:
IP Address:
Enter the IP address provided by your ISP.
If you selected Create a new session as the PPPoE Session:
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Address Mode:
Select either Dynamic IP or Static IP.
Service Name:
Enter the ISP service name (optional).
Select either Always On or Manual.
Reconnect Mode
MTU
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected Static IP as the Address Mode and Create a new session as the PPPoE Session:
IP Address
Enter the IP address provided by your ISP.
Service Name
Enter the ISP service name (optional).
D-Link COVR-3902 User Manual
PPPoE
56
Hide quick links:
Advertisement
Table of Contents
