Web Interface Setup Wizard - D-Link COVR-2600R User Manual

Section 2 - Installation

Web Interface Setup Wizard

If this is your first time installing the router, open your web browser and enter
http://covr.local./ in the address bar. Alternatively, enter the IP address of the
router (default: http://192.168.0.1).
The wizard is designed to guide you through a step-by-step process to configure
your new D-Link router and connect to the Internet.
You can change the language of the setup wizard by selecting a language from
the drop-down menu in the lower left.
Click Next to continue.
Step 1
Plug in the Covr Extender next to the Covr Router and wait approximately 120
seconds for the Extender to boot up. When the Extender is powered on, click
Next to continue.
D-Link COVR-3902 User Manual 24