Table of Contents
Advertisement
Section 3 - Configuration
Advanced Settings - Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
If DHCP-PD is enabled in LAN IPv6 Address Settings:
Enable Automatic
Enable or disable DHCP-PD for other IPv6 routers connected to the
DHCP-PD in LAN:
LAN interface.
Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Autoconfiguration
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
This value is auto-configured with this combination.
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
Range (Start):
IPv6 Address
Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
Range (End):
IPv6 Address
This value is auto-configured with this combination.
Lifetime:
D-Link COVR-3902 User Manual
Auto Configuration (SLAAC/DHCPv6) (continued)
54
Hide quick links:
Advertisement
Table of Contents
