Mount Of Roll; Exchange Of Fuse; Cleaning Of Anti-Static Brush - Taewoo cuTex TBC-50 Manual

⑨ Try to test with paper or tissue (at right, middle, left of knife) by M/CUT button
and adjust control bolt of upper knife finally.
⑩ If cutting is normal, fasten the control bolts of upper knife firmly.
⑪ Attach Stopper again.

Mount of roll

Fix the roll triangle by 4mm-wrench.

Exchange of fuse

Take off the power plug and exchange as picture.

Cleaning of anti-static brush

If anti-static function becomes weak, clean the anti-static brush by other brush.
- Please contact following address for further information.
E-mail : taewoo@cutex.kr
泰 友 精 密
TAEWOO CO., LTD.
ADDRESS : A-302, 1025-1 DOGOK-RI, WABU-EUP,
NAMYANGJOO, KYONGGI-DO, KOREA
TEL ＋82 31 521-6904～7
FAX ＋82 31 521-6908
E-mail : taewoo@cutex.kr
www.cutex.kr
- 4 -
http://www.cutex.kr