Key Functions - Taewoo cuTex TBC-50 Manual

2. Key functions

0
LENGTH
: Current length on display will be back to "0" at a stop.
CLEAR
RESET
: All of current length and current q'ty on display will be back to "0".
5
M/CUT
: Moving knife only.
① to cut the material for test.
② to take out the material jammed between knife blades.
③ for balancing of knife blades in exchange.
1
EXTRA : Cutting additional one.
SHIFT
ESC : Restoring to normal condition in ERROR(red LED)
and inputting parameter or program.
4
6
FEED : To move the roller manually for mounting the material on the machine
FEED
SPEED
― Speed up (The current speed appears on the left-upside of LCD display with
2
"%". Normal speed : 50%, Maximum speed : 100%)
* Speed up is possible in any time(operation or stop) and set-speed will
not be changed even though you press RESET button or power off & on.
8
SPEED
― Speed down (The current speed appears on the left-upside of LCD display
with "%". Normal speed : 50%, Minimum speed : 0%)
* Speed down is possible in any time(operation or stop) and set-speed will
not be changed even though you press RESET button or power off & on.
��
: to insert new program between inputted programs already in time of program-
INS
input.
←
: to delete the wrong program in time of program-input. (All things of the STEP
DEL
will be deleted.)
E-mail : taewoo@cutex.kr
or for feeding it forwards or backwards.
- 2 -
http://www.cutex.kr