Specification; Caution For Use; Exchange Of Knife - Taewoo cuTex TBC-50 Manual

3. Specification

Model Main Cutting
Name Materials
TBC-50 Belt Loop,
(Belt Loop String, Tube,
cutter) Velcro tape

4. Caution for use

- Before use, please confirm the voltage and make ground(earth) connection.
(Static-electricity will be reduced to a half.)
- Do not access hands or any object close to the working knife. (for safety)
- When the knife blade becomes dull, please use it after grinding with the grinding machine.
(Please do not let the unskilled person grind manually or install the knife blade.)

EXCHANGE OF KNIFE

① First of all, unscrew 4 bolts on safety cap and take off the cap.
② Take off stopper.
③ Unscrew 2 control bolts of upper knife by 2.5mm-wrench.(Don't take off.)
④ Unscrew 4 fixing bolts by 4mm-wrench and take off upper knife.
⑤ Unscrew 3 fixing bolts of lower knife by 4mm-wrench and take off lower knife.
⑥ Vice versa, install new lower knife and fasten it firmly.
⑦ Move up upper knife frame and install new upper knife and fix it but don't fasten it firmly.
⑧ By soft touch of M/CUT button, if right bottom of upper knife contacts top of lower knife,
screw the control bolt of upper knife slightly.
E-mail : taewoo@cutex.kr
Max.
Cutting Power
Cutting
Knife Supply
Width
AC110/220V 1mm~
Cold
50/60Hz 110mm
Range of
Cutting Q'ty/min.
Cutting
(Length: 50mm)
Length
1mm~
120～140 cuts
300M
- 3 -
Machine Size Packing Size
(Net Weight) (Gross weight)
540×430×340
850×320×380
(18.6kgs)
(22.1kgs)
http://www.cutex.kr