Useful Adjustment Settings
Sleep Timer
When the selected time elapses, the Sleep Timer
automatically places the system into the standby mode.
Press SLEEP to select the desired time.
• The timer starts counting.
• Each time you press SLEEP, the selection is switched
as below:
30
Off
(cancel)
• The factory default is "Off".
• To cancel the Sleep Timer, select "Off" by pressing
SLEEP.
• Five minutes before the selected time elapses, the
remaining time appears every minute.
PDP-ELITE-Eng (81-96)
60
90
120
(minutes)
85
You can also use the menu to set the Sleep Timer.
1
Press HOME MENU.
2
Press
/
to select "Sleep Timer", and then press
ENTER.
3
Press
/
to select the desired time, and then
press ENTER.
Sleep Timer
Remain 90min
Off
30min
60min
90min
120min
4
Press HOME MENU to exit the menu.
9/9/03, 11:47
12
85
En