Using The Remote Control Unit To Control Other Devices; Receiver Control Buttons - Pioneer Elite PureVision PRO 1110HD Operating Instructions Manual

13 Useful Features
Using the remote control unit to
control other devices
1
2
100
En
PDP-ELITE-Eng (97-105)
Mode switch
(with "TV"
selected)
3
100

Receiver control buttons

When a Pioneer receiver is connected to the display,
the receiver can be operated using buttons 1 to 3.
When a non-Pioneer receiver is connected to the
display, the signals for 1 to 3 must first be learned
before operating. See page 97.
1 RECEIVER a (STANDBY/ON)
Turns the receiver power on and off.
2 RECEIVER INPUT
Selects the input source connected to the receiver.
3 RECEIVER VOL +/–
Adjusts the receiver volume level. Press VOL + to
increase the volume and VOL – to decrease it.
• (RECEIVER) eMUTING
Allows the remote control unit to learn receiver's
mute signal. Use this button when the mode switch
is set to a position other than TV.
• The color-highlighted buttons on the remote control
can learn the control signal from another device's
remote control.
9/9/03, 11:47